Vegetable oil based polyol
Natural Oil Polyol is typically used in Rigid Polyurethane Foam applications. The level of NOP 250 is normally between 10 and 50% within the resin component. This acts as a low cost, environmentally friendly alternative to conventional polyether/polyester polyols. The level of NOP within the resin component is dependent on the formulation and therefore end users should carry out their own assessment of the viability of incorporating NOP within their polyurethane foam systems.
| APPEARANCE |
Clear Straw to Dark Amber Liquid, free from suspended matter |
| MOLECULAR WEIGHT |
810 g.mol-1 |
| HYDROXYL VALUE |
130-170 mg KOH.g-1 |
| WATER CONTENT |
< 0.3 % wt |
| VISCOSITY |
180 to 250 mPas.s |
| SPECIFIC GRAVITY |
0,97 ± 0.015 g.cm3 |
| FLASH POINT |
205 °C |
| CHLORINE CONTENT |
< 0.3% hm |
Technical documentation (PDF).
Vegetable oil based polyol
Natural Oil Polyol is typically used in Rigid Polyurethane Foam applications. The level of NOP 250 is normally between 10 and 50% within the resin component. This acts as a low cost, environmentally friendly alternative to conventional polyether/polyester polyols. The level of NOP within the resin component is dependent on the formulation and therefore end users should carry out their own assessment of the viability of incorporating NOP within their polyurethane foam systems.
| APPEARANCE |
Clear Straw to Dark Amber Liquid, free from suspended matter |
| MOLECULAR WEIGHT |
810 g.mol-1 |
| HYDROXYL VALUE |
240-260 mg KOH.g-1 |
| WATER CONTENT |
< 0.3 % wt |
| VISCOSITY |
180 až 250 mPas.s |
| SPECIFIC GRAVITY |
0,97 ± 0.015 g.cm3 |
| FLASH POINT |
205 °C |
| CHLORINE CONTENT |
< 0.3% hm |
Technical documentation (PDF).
Vegetable oil based polyol
Natural Oil Polyol is typically used in Rigid Polyurethane Foam applications. The level of NOP 250 is normally between 10 and 50% within the resin component. This acts as a low cost, environmentally friendly alternative to conventional polyether/polyester polyols. The level of NOP within the resin component is dependent on the formulation and therefore end users should carry out their own assessment of the viability of incorporating NOP within their polyurethane foam systems.
| APPEARANCE |
Clear Straw to Dark Amber Liquid, free from suspended matter |
| MOLECULAR WEIGHT |
810 g.mol-1 |
| HYDROXYL VALUE |
v rozsahu 320-340 mg KOH.g-1 |
| WATER CONTENT |
< 0.3 % hmotnosti |
| VISCOSITY |
190 až 260 mPas.s |
| SPECIFIC GRAVITY |
0,97 ± 0.015 g.cm3 |
| FLASH POINT |
205 °C |
| CHLORINE CONTENT |
< 0.3% hmotnosti |
Technical documentation (PDF).
